|
Aramid Honeycomb is a lightweight, high strength, nonmetallic honeycomb manufactured from aramid fiber paper. After the honeycomb is formed, it is coated with a heat resistant phenolic resin to increase its strength. The core material exhibits high strength to weight ratio, low density, and is very bondable. Aramid honeycomb is becoming increasingly used in high-performance non-aerospace components due to its high mechanical properties, low density and good long-term stability. The Standard Cell honeycomb is manufactured with the typical hexangular cell shape. It is best suited for flat panel applications or those which the core needs to conform to a slight curvature.
- Shipping: Thicknesses .Will be rolled for shipping unless otherwise requested.
|
|
|
|
Rohacell is a structural foam that is compatible with most adhesives and finishes. Rohacell is white in color and uniform in density. Will take up to 250F processing temp. 4.7 PCF, 213 PSI compressive strength.
Available sizes:
|
|
|
|
Aramid Honeycomb is a lightweight, high strength, nonmetallic honeycomb manufactured from aramid fiber paper. After the honeycomb is formed, it is coated with a heat resistant phenolic resin to increase its strength. The core material exhibits high strength to weight ratio, low density, and is very bondable. Aramid honeycomb is becoming increasingly used in high-performance non-aerospace components due to its high mechanical properties, low density and good long-term stability.
The Standard Cell honeycomb is manufactured with the typical hexangular cell shape.
Over-Expanded Cell Aramid Honeycomb has a rectangular cell shape, thereby allowing the core to flex in one direction easily.
- Thickness: .060", .125", .185", .250" and .500"
- Shipping: Thicknesses .250” and under will be rolled for shipping unless otherwise requested. The .500” thickness honeycomb will be shipped flat and additional shipping and handling charges apply.
- Available until sold out
The following excess remnants of aramid honeycomb vary in size and will be at least the smaller listed size. Pricing is based off of the smaller size parts.
- The SML parts range in size from 11” x 11” to 15” x 20”
- The MED parts range in size from 19” x 22” to 22” x 28”
- The LRG parts range in size from 22” x 50” to 24” x 54”
Please note: All clearance items are sold as is and are not refundable.
|
|
|
