|
Kevlar® Tape is a narrow width of woven fabric that has a selvage to prevent fraying. These tapes have been treated with an epoxy finish to provide optimum adhesion between the fiber surface and the resin. A great alternative to cutting small widths of woven fabric that unravels when being bonded to the substrate. Recommended as a reinforcement where stiffness in the 0/90 direction is required. Kevlar® Tape exhibits the same properties as woven Kevlar® fabrics.
- Weight: 1.8oz. / yard²
- Widths: 1”, 2”
- Note: This product does not have an adhesive backing
|
|
|
|
Kevlar® Tape is a narrow width of woven fabric that has a selvage to prevent fraying. These tapes have been treated with an epoxy finish to provide optimum adhesion between the fiber surface and the resin. A great alternative to cutting small widths of woven fabric that unravels when being bonded to the substrate. Recommended as a reinforcement where stiffness in the 0/90 direction is required. Kevlar® Tape exhibits the same properties as woven Kevlar® fabrics.
- Weight: 5oz. / yard²
- Widths: 1”, 2”, 3”, 4”, 6”
- Note: This product does not have an adhesive backing
|
|
|
|
Braided Kevlar® Sleeve is a bi-axial braid of precisely oriented fibers of maximum stiffness, torsial stability, and compressive strength. The sleeve has a 45 degree orientation and can be increased from their base diameter up to 30% and decreased up to 70%. A bi-axial braided sleeve easily and repeatedly expands open to fit over molding tools or cores. They can accommodate straight, uniform cross-section forms as well as non-linear, irregular cross section components.
|
|
|
