|
For Kevlar® and other tough fabrics:
-
Superior ergonomic design
-
Requires much less effort to use than cutting manually
-
Light weight and maneuverable
-
Rechargeable long lasting battery
-
No cord to worry about
-
Carbide insert blades for longer wear
-
Can be operated with cord and battery adapter (supplied) for unlimited cutting time
-
Short rapid strokes for intricate work
-
Not recommended for material over 1/8 inch thick due to short stroke
Kit comes with:
-
Shoe Blade
-
Rechargeable DC battery
-
AC Adapter
-
Charger Transformer with Power Cord
|
|
|
-
8" Multi-Purpose GINGHER® Serrated Scissor
-
Stainless steel blades bonded to a high-impact black lightweight nylon frame
-
Knife edge cutting blade for extra sharpness
-
Serrated integral blade assures a firm grip on slippery synthetics
-
An excellent choice for lay-up work
-
Easily cleaned with acetone
-
Keep one pair for cutting Kevlar or fiberglass and a second pair for other materials
|
|
|
|
These shears were developed specifically for cutting Kevlar® fabrics. It uses a wear resistant surface coating that will not chip or flake off. They have an estimated life of ten times that of uncoated shears, and can be resharpened if required.
|
|
|
|
Spring-Loaded Composite Shears are ideal for hard-to-cut Kevlar®, graphite, carbon and fiberglass fabrics used in the reinforced composites industry today. The steel blades grip dry fabrics and prepregs allowing easy precision cutting and trimming.
-
Low cost
-
4.25 ounces overall weight
-
2.25 inch spring loaded steel blade
-
7.5 inch overall length
-
Plastic handles inert to most shop solvents
-
Thumb activated safety lock
-
Resharpenable
|
|
|
|
Lightweight, extremely sharp and comfortable left handed composite scissor. These scissors are useful during the lay-up process for a variety of purposes. |
|
|
|
An industrial style cutter with a 3 " diameter rotary cutter. The most convenient way we have found to cut fiberglass cloth. Leaves a very sharp cut with very few frayed edges. When glassing foam wings during vacuum bagging, the glass can easily be cut by using the Mylar as a template and running the rotary cutter around the Mylar to trim the glass.
-
Extra blade included
-
Replacement blades are available
|
|
|
-
3/4" 6x Magnifier Tweezers
|
|
|
|
Teflon coated non-porous glass provides an non-stick, smooth surface. Non-porous products will retain resin and the 12 x 12 sheet size makes it convenient to use on your table surface and allows for easy resin clean up.
|
|
|
|
A thin tough alloy steel wire coated with carbide grit. It can be used in a 10" coping saw or hacksaw to cut all types of composite laminates easily by hand.
|
|
|
|
1/4" shank saber saw blade that uses thousands of tiny tungsten carbide particles bonded to the cutting surface to obtain a superior cutting edge that will easily cut all composite materials. These blades are recommended for cutting ACP's graphite or glass faced end-grain balsa panels. Unlike a band saw blade, these blades leave an exceptionally smooth cut and will not snag the bottom laminate.
|
|
|
