|
A thick black gel used to produce a hard, durable surface coat on room temperature epoxy molds. This system has good brushing characteristics, 30 minute pot life and is recommended for use with EZ-Lam ET-02 room temp laminating tooling resin.
-
Available Sizes: Quart Kit, Gallon Kit
-
Shipping: Gallon Kits can only ship ground
|
|
|
|
A resin for the construction of high strength fiberglass room temperature cured epoxy molds. This system is a low odor epoxy resin that has excellent wet out characteristics and is recommended for use with EZ-Lam ET-01. Due to its higher viscosity than typical laminating resins it works well on contoured tools.
-
Available Sizes: Quart Kit, Gallon Kit
-
Shipping: Gallon Kits can only ship ground
|
|
|
|
A thick aluminum filled gel used to produce a hard, durable surface coat on high temperature epoxy molds. This system is designed for molds that will operate up to 350°F when used in conjunction with the EZ-Lam ET-04 High Temperature Laminating Tooling resin. Its room temperature cure allows for quick lay-up of the mold on a room temp. master. The mold can be removed from the master and post cured to 300°F. This system can be used for oven, autoclave, and vacuum forming tooling.
-
Available Sizes: Quart Kit
|
|
|
|
A high temperature epoxy laminating system for construction of molds that will operate up to 350°F. It is designed to be used with EZ-Lam ET-03 High Temperature Surface Coat. It has excellent wet-out characteristics for working on compound contours. Its room temp setting cure allows for quick lay-up of the mold on a room temp masters. The mold can then be removed from the master and post cured to 300°F. This system allows free standing post cures of oven, autoclave and vacuum forming tooling.
-
Available Sizes: Quart Kit, Gallon Kit
|
|
|
