Vacuum Bagging Supplies

The yellow sealant tape is a high temperature multi-purpose tape. It is easily removable from tooling surfaces and is higher in tack than the gray tape, making it less likely to develop leaks.   Due to its high tackiness, however, it is more difficult to shift its position after initial placement.

• 400° F max operating temperature  
• 1/2” Wide, 1/8” Thick,  25' per roll
• Airtech Product: AT-200Y

The gray sealant tape is a high temperature multi-purpose tape designed to seal the vacuum bag to metal or composite tooling surfaces. It is softer than the yellow sealant tape and offers easy removal of the tape after cure.

• 400° F max operating temperature  
• 1/2" Wide, 1/8” Thick,  25' per roll

A quick, convenient, innovative method of sealing the nylon bagging tube exclusively from ACP. Eliminates the need for vacuum bagging tape to seal the end of the bag tube. Allows easy access into the bag and repeated usage of the bag tube. Simply lay the bag tube over the rod and snap the “C” channel on down over the rod.

• Lengths: 20”, 40”, and 70”
• Max Operating Temperature: 125°F.
• Note: Sold individually

Frekote 700 is an economical all-purpose release that works with most epoxy resins. It offers excellent release properties, doesn't build up, requires no baking, and has minimal transfer.

A blend of imported waxes formulated to provide the maximum number of releases per application. It has no Silicon added thereby allowing the waxed Mylar to be painted and will not "Fish Eye" or pucker the paint finish.

• Standard temp, Partall #2 - 24 oz. can
• High temp, Partall High Temp - 12 oz. can

Thin film tape that can be used to apply pressure on layed up braided carbon tube structures to compact the laminate. Requires 175°F to activate shrinkage.

• Available in 100 Yd. rolls
• Available as:
  • Release coated - non-perforated
  • Release coated - perforated
  • Non-release coated - non-perforated

A blue polyester multipurpose tape with a silicone adhesive for use as a flash breaker tape in composite bonding as well as in composite bagging operations. Coated with a .0015" thick fully cured high temperature silicone adhesive.They can be used to hold bagging materials in position during the bagging process or mask off areas. Releases clean without leaving a residue.

• Width: 1”
• 72 yard roll

Partall® Coverall Film is the new non-hazardous, low VOC water-based polyvinyl alcohol (PVA - Parting Film) coating that acts as a barrier between parts and reactive mold surfaces. Partall® Coverall Film is also recommended for use on seasoned molds as extra protection against de-molding problems. Higher solids content aids production efficiency by providing greater protection with fewer coats applied saving labor, time and material. Improved formulation enhances use - no fisheyes or cob webbing, self-leveling and faster dry film build up. The higher viscosity of Partall® Coverall Film allows application by brush, roller, sponge or cloth as well as excellent spray characteristics.

This DVD will take you through the basics of vacuum bagging foam core wings. Shows use of the Auto-Vac system, popular methods and best practices. A must for the first time vacuum bagger!