|
The Auto-Vac is a new, fully automatic vacuum bagging system that is completely self-monitoring, thereby eliminating the need for the pump to run continuously. It has a fully adjustable vacuum switch and a large capacity reservoir which prevents frequent cycling of the vacuum pump. It comes completely assembled, mounted on a wood base and ready to use.
- Available in 115v and 230v
Auto-Vac System includeds:
- Auto-Vac electric pump, rated up to 20" Hg
- Vacuum switch adjustable from 3" - 20" Hg
- Vacuum gauge
- Large capacity reservoir
- (1) check valve
- 3ft neoprene tubing
- (1) EZ-Vac connector
- (1) 1/4" Hose clamp
- *9ft bag tube
- *(2) Quick-Lock seals
- *9ft breather cloth
- ACP basic vacuum bagging instructions
Following options are available:
- 18: 18” Bag tube, 20” Quick-lock seal and 15” Breather
- 36: 36” Bag tube, 40” Quick-lock seal and 30” Breather
- 60: 60” Bag tube, 70” Quick-lock seal and 60” Breather
- Mounted Auto-Vac Assembly without bagging materials*
|
|
|
|
An ideal starter kit for vacuum bagging sheeted or glassed white foam structures.
- Available in 115v and 230v
The EZ-Vac Bagging Kit includes:
- (1) EZ-Vac Pump
- 9' of 18" wide bagging tube
- 3' neoprene hose
- (2) 20" Quick Lock seals
- (1) EZ-Vac bag connector
- 9' of 15" wide breather cloth
|
|
|
|
Upgrade your Auto-Vac or EZ-Vac system by adding the Plus Kit which includes ( must be added in addition to system ):
-
6' Mylar (24” or 48”)
-
1 Yd. x 60" wide peel ply
-
24 oz. mold release wax
|
|
|
|
Resin Infusion is a relatively new technique in composite construction.It results in a high quality composite laminate, with high fiber/resin ratio, and perfect adhesion to core materials. Airtech’s Resin Infusion Kit includes reusable hardware items, a hands-on training video, and all the necessary materials to test different resin systems, different cores, and different fibers.
Included is:
- Hands-on Training DVD
- Vacuum Reservoir
- 50ft Tubing
- 50ft Spiral Tube
- 10ft Omega Flow Line
- (6) 3/8” Nylon “T” Fitting
- (6) 3/8” Nylon Elbow Fitting
- 20ft Resin Distribution Medium 41” Width
- Adhesive Coasted Fiberglass Tape
- 20ft Vacuum Bagging Film .002”thick, 60”Width
- 15ft Release Coated Peel Ply 60” Width
- (6) Yellow Sealant Tape
- 1” Wide hold down tape
- 1” Wide double back tape
- (3) Resin Feed Line Clamp
- (1) 5 Gallon Pail
|
|
|
|
The vacuum generator vacuum system is a cost effective vacuum bagging system for those that have an air compressor. This generator will create 27" of hg/vacuum pressure when used with an air compressor capable of producing 2.2 cfm. Can be utilized for parts up to 80 sq. ft. Please note that the air compressor must run continuously.
Included is:
- Vacuum Generator
- Vacuum gauge
- (1) EZ-Vac connector
- (1) 1/4" Hose clamp
- (1) 3 Way connector
- (2) Pipe to hose fittings
- 2ft neoprene tubing
- 9ft bag tube
- (2) Quick-Lock seals
- 9ft breather cloth
|
|
|
